100PQ Attaches Ouragan Monoface 18ga en Acier Inoxydable Galvanisé

Prix:

Fabricant: Simpson Strong Tie

SKU: H3

UPC Code: 044315302008

Aperçu
Spécification
Specifications
Contactez-nous

The single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path; the Hurricane tie resists both lateral and uplift loads.

18 ga.
Galvanized (G90), stainless steel or ZMAX® coating.
Hurricane ties are available in left- and right-hand models and can be installed in pairs.
Provides a connection between the rafter or truss and the wall of the structure that helps resist wind and seismic forces.
Approved for installation with load-rated Strong-Drive® SD Connector screws.
Use also for a variety of connections where one member crosses another.

Spécifications des produits

Nom d'attribut	Valeur d'attribut
PRODUIT
Largeur (cm)	11.747500
Profondeur (cm)	3.968750
Hauteur (cm)	3.968750
Poids (kg)	0.048900
BOÎTE MAÎTRE
Quantité	1
Largeur (cm)	11.750000
Profondeur (cm)	3.970000
Hauteur (cm)	3.970000
Poids (kg)	0.050000
PALLET
Quantité	0.000000
Pallet Volume	0.000000
Largeur (cm)	0.000000
Profondeur (cm)	0.000000
Hauteur (cm)	0.000000
Poids (kg)	0.000000

Product Dimention

Send us a message

Nom et prénom *

Votre adresse email *

Demande de renseignements *

Aperçu
Spécification
Specifications
Contactez-nous

The single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path; the Hurricane tie resists both lateral and uplift loads.

18 ga.
Galvanized (G90), stainless steel or ZMAX® coating.
Hurricane ties are available in left- and right-hand models and can be installed in pairs.
Provides a connection between the rafter or truss and the wall of the structure that helps resist wind and seismic forces.
Approved for installation with load-rated Strong-Drive® SD Connector screws.
Use also for a variety of connections where one member crosses another.

Spécifications des produits

Nom d'attribut	Valeur d'attribut
PRODUIT
Largeur (cm)	11.747500
Profondeur (cm)	3.968750
Hauteur (cm)	3.968750
Poids (kg)	0.048900
BOÎTE MAÎTRE
Quantité	1
Largeur (cm)	11.750000
Profondeur (cm)	3.970000
Hauteur (cm)	3.970000
Poids (kg)	0.050000
PALLET
Quantité	0.000000
Pallet Volume	0.000000
Largeur (cm)	0.000000
Profondeur (cm)	0.000000
Hauteur (cm)	0.000000
Poids (kg)	0.000000

Product Dimention

Send us a message

Nom et prénom *

Votre adresse email *

Demande de renseignements *

The single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path; the Hurricane tie resists both lateral and uplift loads.

18 ga.
Galvanized (G90), stainless steel or ZMAX® coating.
Hurricane ties are available in left- and right-hand models and can be installed in pairs.
Provides a connection between the rafter or truss and the wall of the structure that helps resist wind and seismic forces.
Approved for installation with load-rated Strong-Drive® SD Connector screws.
Use also for a variety of connections where one member crosses another.

Spécifications des produits

Nom d'attribut	Valeur d'attribut
PRODUIT
Largeur (cm)	11.747500
Profondeur (cm)	3.968750
Hauteur (cm)	3.968750
Poids (kg)	0.048900
BOÎTE MAÎTRE
Quantité	1
Largeur (cm)	11.750000
Profondeur (cm)	3.970000
Hauteur (cm)	3.970000
Poids (kg)	0.050000
PALLET
Quantité	0.000000
Pallet Volume	0.000000
Largeur (cm)	0.000000
Profondeur (cm)	0.000000
Hauteur (cm)	0.000000
Poids (kg)	0.000000